Now the upgraded version of the test plan is here! From the simple mode of single radar + SOPAS software, it is upgraded to a full-featured 3D scanning measurement demonstration system composed of LMS4111R lidar, DBS36E incremental encoder, SIM1000 controller, IME08 inductive proximity switch, etc., which can effectively test, Show the actual application effect of the product!
Demo case can implement two scanning methods:
Just swing the LMS4111R lidar directly to complete 3D scanning within a set time (seconds) and within a fixed angle range. Please watch the video for details.
Just install the LMS4000 lidar and encoder on the translation equipment (conveyor line, driving, etc.), input the encoder signal to the radar, connect the radar data port to the Ethernet port of the demo box, and then change the scan mode to linear mode in the browser debugging interface (Linear Mode) is to perform linear translation scanning.
The measurement results can be displayed in real time directly on the browser control interface, or you can download the PCD file and open it with third-party point cloud software.
LMS4000 Demo case samples are in place, welcome to contact us for testing!
The Links: 3HAC14363-1 3HAC025562-001
